热销产品: 活性炭 新注册会员免费送彩金 注册自动送198元彩金 煤质柱状活 木质粉状活 木质柱状活

各行业专用活性炭

电镀专用活性炭

作者:Admin   活性炭,联系电话:13783521281 浏览 发布时间:2012-03-31

 电镀专用活性炭

 
    电镀专用活性炭用于镀镍、氢化镀铜镀银、及铜锡合金、HEDP镀铜、镀铬等金属精加工。产品吸附效果好,吸取重金属杂质,因而使镀层无脆性并防止镀层发花现象产生。根据电镀工艺中经常出现的问题,有针对性地开发、研制而成的高等级活性炭素。在实际操作过程中,经常会出现起雾、不上镀、发黑、起皮、起泡、色差等现象。这些现象的出现,除了电镀液的配方及使用条件因素外,与它的纯净度有直接的关系。 电镀专用炭,对于电镀液的提纯、除杂是提高镀件产品质量的重要手段之一,它能使镀层均匀、结晶细致、孔隙率小,结合牢固。在电镀槽里,将配制好的电镀液加以搅拌以后,放入电镀用活性炭素,再继续搅拌约半小时后,既可使之慢慢沉淀,它的提纯、除杂工序就完成了。
Xin Jie licensing electroplating special active carbon for nickel plating, silver plating, and hydrogenated copper alloy of copper and tin, HEDP copper, chrome and other metal finishing. Products of good adsorption effect, absorb heavy metal impurities, so that the coating without brittle and prevent coating color phenomenon. According to the electroplating process that often appear in the issue, has targeted the development, development of high grade activated carbon. In actual operation, often foggy, not plating, blackening, peeling, blistering, color and other phenomena. These phenomena, in addition to electroplating liquid formula and use condition factors, and it is directly related to the degree of purity. Special active carbon for electroplating, plating solution purification, impurity removal is to improve plating quality is one of the important means, it can make the coating is uniform, fine crystallization, low porosity, firm combination. In a plating bath, the prepared electroplating solution mixing, into the electroplating with active carbon, and then continue to stir for about half an hour later, can make it slowly precipitation, purification, impurity removal process is complete.
  电镀专用活性炭技术指标:
项   目
指标
粒度50-80目
%
90
碘吸附值
mg/g
950
亚甲兰吸附值
ml
9
表观密度
g/ml
0.45
水分
%
10
可容性灰分
HEDP镀液中显阴性
    果壳椰壳电镀专用活性炭主要用于镀镍、氢化镀铜、镀银、及铜锡合金、HEDP镀铜、镀烙等金属精加工。产品吸附效果好,因而使镀层无脆性并防止镀层发花现象产生。

    优质电镀专用炭主要适用于电镀厂电镀液杂质的去除及电镀废水的电镀专用炭,对于电镀液的提纯、除杂是提高镀件产品质量的重要手段之一,它能使镀层均匀、结晶细致、孔隙率小,结合牢固。在电镀槽里,将配制好的电镀液加以搅拌以后,放入电镀用活性炭素,再继续搅拌约半小时后,既可使之慢慢沉淀,它的提纯、除杂工序就完成了。


上一篇:【高纯炭棒专用活性炭
下一篇:【活性氧化铝

博聚网